Fire & Emergency

XDR SITRAK 6×4 WATER AND FOAM FIRE TRUCK

A high-capacity water-and-foam reference for fleet planning.

1 / 1

Purpose-built possibilities

Vehicle range: Xindongri / XDR
Manufacturer photos · request the exact quoted build

Your work.
Your specification.

A SITRAK 6×4 reference with separate water and foam storage and a rear pump installation. Published dimensions, engine identity and liquid quantities support an initial procurement comparison. Station access, replenishment and the approved equipment inventory remain part of the final build review.

Manufacturer model YZR5310GXFPM150/G6
Water replenishment and station access
Written equipment inventory and acceptance scope required

Request a vehicle specification Discuss your requirements

A clear starting point

Configuration overview.

Photographs show vehicles from the manufacturer’s range. Confirm the exact chassis, model code, capacity and operating limits for the vehicle quoted to you.

Vehicle model: YZR5310GXFPM150/G6
Overall dimensions: 10300x2550x3640mm
Gross vehicle mass: 31000kg
Fire pump reference duty: 100L/s at 1.0MPa
Approach angle: 19°
Departure angle: 9°
Drive arrangement: 6×4
Wheelbase: 4600+1400mm
Engine model: MC11.46-61
Engine rated power: 341kW
Chassis model: ZZ5356V524MF5
Water tank: 12000 L
Foam concentrate tank: 2941 L
Rated load mass: 15000kg
Curb mass: 15550kg
Published extinguishing-agent capacity: water 12000L, foam 2941L
Fire monitor rated flow: 80L/s at 0.8MPa
Published monitor range: water ≥85m, foam ≥80m
Fuel type: Diesel
Engine displacement: 10518ml
Fire pump — rated flow: 100L/s
Fire pump — rated pressure: 1.0Mpa
Fire pump — maximum suction depth: 7m
Fire pump — priming time: ≤60s
Foam proportioner — foam proportioner model: PH64
Foam proportioner — mixing ratio: 6%
Fire monitor — fire monitor model: PLDK8/80
Fire monitor — rated pressure: 0.8MPa

Planning your vehicle

Water replenishment and station access

Provide the intended water supply, hose couplings, foam concentrate and response environment. Review the loaded envelope, storage layout and service access. Confirm pump performance against a defined duty rather than judging suitability from tank size alone.

Crew cab layout

The YZR5310GXFPM150/G6 equipment description specifies Four-door access, two-row crew seating.

Tank construction and fittings

The YZR5310GXFPM150/G6 equipment description specifies 304-grade stainless steel, internal anti-surge baffles, liquid-level indication, drain outlets, overflow provision.

Equipment storage and access

The YZR5310GXFPM150/G6 equipment description specifies aluminium roller shutters, fold-down access steps.

Working equipment and operating references — YZR5310GXFPM150/G6

Fire monitor rated flow: 80L/s at 0.8MPa; Published monitor range: water ≥85m, foam ≥80m; Fire pump — rated flow: 100L/s; Fire pump — rated pressure: 1.0Mpa; Fire pump — maximum suction depth: 7m; Fire pump — priming time: ≤60s.

Before you enquire.

What should I include in an enquiry for this vehicle?

Response duty, destination, crew, terrain, water/foam requirements, carried equipment, local standards and acceptance scope. Request the exact model codes and equipment list, with inspection, spare-parts and shipping scope itemised.

Can a water tender, foam truck and CAFS truck be specified the same way?

No. Water supply, foam equipment and compressed-air foam describe different system requirements. State the operational brief and ask for a model-specific technical proposal. The final equipment list, documentation and agreed acceptance tests define the purchase.

How do I confirm the exact vehicle?

Request the chassis and complete vehicle model codes, specification sheet, current photographs and written equipment list. Listing images do not confirm stock or approval for your destination country.

Does the configurator show this exact vehicle?

The configurator is a separate three-view concept preview. It does not reproduce every manufacturer vehicle. Use this gallery and the specification supplied with your quotation to review the actual build.

What about warranty, spare parts and delivery?

Confirm chassis and body warranty separately, including exclusions and the responsible service provider. Request a spare-parts list, operating manual, inspection plan and shipping scope. Delivery dates and support terms are agreed in the written quotation.

Does the estimate include every cost?

The separate configurator uses illustrative USD amounts, not prices for this listing. Request a written quotation specifying equipment, taxes and delivery costs.

From enquiry to handover

Know what you are buying.

Explore the overseas buyer guide

A written specification.

Agree the chassis model, body capacity, equipment list and destination requirements. Request the exact model code, dimensional drawing and quotation before placing an order.

Evidence before dispatch.

Agree an inspection checklist and request current photos, operating videos and vehicle identification for the quoted build. Confirm shipping scope, documents and delivery milestones in writing.

A clear support scope.

Confirm who supports the chassis and body, warranty coverage, exclusions, spare parts and training. Service availability and response arrangements form part of the quotation.