Technical specifications
Published reference data for the vehicle discussed in this guide. Confirm the selected build in the supplier’s specification.
| Parameter | Published value |
|---|---|
| Vehicle model | HYS5044TQZH6QL |
| Chassis | JAC Junling V5 |
| Specified wheelbase | 3,365 mm |
| Flatbed length | 5.1 m |
| Flatbed clear width | 2.1 m |
| Listed winch rating | 4 t |
| Winch cable length | 21 m |
| Transmission | 5-speed manual |
About the Hongyu JAC Junling V5 Recovery Truck
The JAC Junling V5 recovery truck combines a flatbed with a cable winch for loading disabled vehicles. The published configuration includes tie-down equipment, auxiliary trolleys and a toolbox for roadside recovery work.
Applications and operating scenarios
A flatbed recovery vehicle carries disabled vehicles onto a platform using the specified loading equipment. Roadside assistance and vehicle transport enquiries should identify the vehicles to be handled and the available loading space. Low-clearance vehicles and restricted roadside locations need a reviewed loading arrangement.
How to read the specifications
The published winch rating is not the transport payload of the flatbed. Platform dimensions, loading geometry and the completed truck's approved masses must be considered separately. Check the wheelbase and usable platform area against the actual vehicles to be recovered.
Selection and quotation checklist
Provide target vehicle dimensions, mass and any restrictions on wheel movement or steering. Request the flatbed loading limits, restraint layout and loading equipment list. Confirm the exact accessories included rather than assuming every item visible in a reference photograph is supplied.
Reference scope
This guide uses the published Hongyu vehicle reference linked below. The technical values describe that reference, not every vehicle in the range. Final equipment, availability and destination requirements are confirmed for the quoted build.
