Technical specifications
Published reference data for the vehicle discussed in this guide. Confirm the selected build in the supplier’s specification.
| Parameter | Published value |
|---|---|
| Manufacturer range | Chengli / CLW |
| Reference listing | Dongfeng 4×2 garbage compactor |
| Exact model & availability | Confirm in written quotation |
| Destination compliance | Review for your destination market |
About the Refuse Collection Truck
Explore the Dongfeng 4×2 garbage compactor from the Chengli range. Manufacturer photographs show a reference vehicle; the supplied chassis, equipment and destination-market specification must be confirmed in your quotation.
Applications and operating scenarios
Rear-loading refuse collection is organised around the containers used on a route and the available space at each stop. This Dongfeng reference supports discussion of municipal bin collection and transport to a designated unloading point. Route width, reversing space and the crew's access to loading controls deserve early review.
How to read the specifications
Body volume is not a direct statement of legal payload or the mass of waste that can be collected. Waste composition and installed equipment affect the working load. The current listing is a range reference, so request a confirmed vehicle model and technical sheet for the offered compactor.
Selection and quotation checklist
List the bin types, lifting interfaces, stop pattern and disposal-site arrangements. Ask the supplier to specify hopper, body, leachate storage and control equipment for the selected build. Keep cycle-time claims tied to a documented operating condition.
Reference scope
This guide uses the published Chengli / CLW vehicle reference linked below. The technical values describe that reference, not every vehicle in the range. Final equipment, availability and destination requirements are confirmed for the quoted build.
